When you’re ready to hit the open road and hit the trails, adding a sway bar to your travel trailer is a must. Not only will this make your travels much more enjoyable, it will also help reduce the amount of damage that can be done in an accident. Though installing a sway bar on a trailer can be a little tricky at first, following these simple steps will have you on your way in no time. So read on and learn how to install a sway bar on a travel trailer like a pro!
What is a sway bar?
A sway bar is a metal bar that is mounted to the vehicle frame on either side of the axle to control excessive side-to-side oscillation. When applied pressure to one end, it restricts the movement of the suspension links while allowing the vehicle to rotate around its vertical axis. Sway bars are most commonly used on passenger cars, but can also be installed on light trucks and SUVs.
How do sway bars help a travel trailer?
A sway bar is a device that is installed between the trailer frame and the body of the truck to distribute the weight of the trailer more evenly. The sway bar will help keep the trailer from bouncing and shaking while in motion, making it less likely for things like furniture to move. If your travel trailer does not have a sway bar, you can install one by following these simple steps:
1. Remove the wheel well cover. You will need to remove both front and rear wheel well covers in order to access the hardware that holds them on.
2. Remove the two bolts that hold each side of the sway bar bracket to the frame of your travel trailer.
3. Position the bracket so that it is centered on one of the frame rails and tighten both bolts down with a wrench. Be sure to check for alignment before tightening as there are tolerance requirements for this part of the installation process.
4. Repeat this process on the other side of the trailer where you will also install a new bolt into place at top of bracket and attach eyebolt to secure device in place (you may wish to create a temporary anchor using cable ties). The completed installation should look something like this:
How to install a sway bar on a travel trailer?
Installing a sway bar on a travel trailer can vastly improve the handling and stability of the vehicle. This guide will show you how to remove the existing sway bar and install a new one on your trailer.
1. Verify that your travel trailer has a tow hitch installed. If not, your trailer won’t be able to use the installation instructions below.
2. Locate the bolts that secure the sway bar to the frame of the vehicle. On some trailers, these bolts are hidden behind panels or behind hardware in other locations. Inspect your vehicle carefully before beginning so that you don’t miss any bolts!
3. Once you have located the bolts, loosen them using a wrench or socket until they are slightly loose and can easily be pulled out.
4. Carefully pull out the old sway bar and set it aside in a safe place.
5. Insert the new sway bar into place by threading it onto the bolts that were previously loosened. Make sure that it is correctly aligned with the frame of your trailer before tightening down the bolts again using a wrench or socket..
6.. Reattach any panels or hardware that may have been displaced during installation, and replace any damaged parts as necessary..
Conclusion
If you’re in the market for a new travel trailer and are thinking about installing a sway bar, I’ve got just the guide for you. In this article, I’ll show you step by step how to install a sway bar on your travel trailer, including tips on choosing the right installation kit and how to make sure everything goes smoothly. So if want to take your travel experience up a notch, read on!
Other Articles
How to join a travel baseball team?
How to get permission to travel while on probation?
No Comment! Be the first one.